£18.00
A biomechanical brute mid-swing with a colossal power-hammer, bristling with cables, plates, and a snarling respirator.
This savage enforcer blends flesh and forge. The Cyborg Abomination – Ironclad Brute lunges forward, hammer raised high, its torso crisscrossed with riveted plates and thick conduits that feed the weapon’s brutal head. A respirator clamps over its jaw, turning a bestial roar into a hiss of steam and grit.
Layered details invite close inspection: a patchwork skirt stitched from torn panels, a heavy ringed belt with a circular vent plate, and coils of tubing cinched around the midriff. One leg is a reinforced mech-limb with pistons and a blocky foot, while the other remains bare and scarred, grounding the stance as the back-mounted rig drives the overhead strike.
On the table, this model excels as a boss monster, arena champion, or pit-lab guardian. Its industrial horror aesthetic fits ruined foundries, underhive warrens, or alchemical workshops, adding a menacing centerpiece that demands attention in any scenario.
Resin Models
All of our models are manufactured to the highest standards using minimum 12K resolution UV reactive resins.
Our Process
Once printed all of our models are thoroughly washed using Iso-Propyl Alcohol to remove all uncured resins. After they have all had their little bath all supports are carefully removed and then put through a final curing process.
After final curing, the manufacturing process is complete. The models are then put through Quality Assurance.
Quality Assurance
All models go through a comprehensive quality assurance check. We are looking for any lost detail, poor printing, missing parts or damages. We also test fit multi-part models to ensure that all gaps are as minimal as possible, including how a base sits on the table.
During this process you may find there are small sanded points to ensure a good fit or for bases that they are level and flat.
Packaging and Shipping
We want to make sure your models arrive with you in the best possible condition. Where possible all parts are packaged in air tight bags and carefully wrapped in the most appropriately sized boxes.
Damages and Missing Parts
We have a no-quibble guarantee on all of our orders. We absolutely hate if there is anything wrong, so just get in touch, with photos of any damage and we will get the replacements out as soon as possible.
Please note. Resin models are not considered toys. 12+
WARNING. Not suitable for children under 36 months.
| Scale | 36mm |
|---|---|
| Material | Resin |
| Base | Plastic Base |
| Assembly | Single Piece |
| Designer | Cast N Play |
| SKU | CNP0722cyborgAbomination |
